Ventosas a Vácuo para Manuseio de Vidro

Glass suction cups form the contact interface between a vacuum handling system and the glass workpiece. EUROTECH offers industrial suction cups for glass processing, automated transfer and vacuum lifting applications. The appropriate cup depends on the glass surface, workpiece dimensions, load, handling orientation and machine connection.

For flat glass, mirrors, laminated panels or other glass products, check the actual contact surface and processing conditions before selecting a cup. Coatings, surface texture, moisture, temperature and contamination can affect sealing, friction and marking. Cup selection should be assessed together with the complete handling system and its operating instructions. Before handling glass, consider the following precautions:

• Use equipamentos de elevação e equipamentos de proteção individual (EPI) apropriados.
• Inspecione a placa de vidro quanto a danos antes de manuseá-la.
• Apoie e estabilize com segurança a placa de vidro durante o manuseio e planeje a rota de manuseio e o posicionamento com antecedência.

Principais tipos de vidro na indústria de processamento de placas de vidro

Ventosas a vácuo para manuseio de vidro

Select glass suction cups by the operating conditions at the contact surface, not by cup diameter alone. The effective suction area and available pressure difference influence holding force, while friction, acceleration, load direction and the handling system’s safety requirements affect the usable capacity.

• Surface and geometry: Match the sealing lip and cup shape to the contact area. Curved, coated or textured surfaces require application-specific evaluation.
• Material and temperature: Compare the specified cup compounds for temperature, cleaning agents, wear and contact requirements. Refer to the individual product data rather than assuming every cup of the same material performs identically.
• Mounting and support: Check the connection, base plate, bolt pattern and available clearance against the existing machine. Similar external dimensions do not establish compatibility.
• Vacuum and load: Confirm the operating vacuum, cup arrangement and load conditions using the equipment manufacturer’s selection guidance.

Browse the product range below, including flat vacuum suction cups. Where contact marks are a concern, assess the glass surface and cleaning process, and review suitable suction cup covers. Covers require their own compatibility and handling assessment.

• Vedação da placa de sucção para superfícies lisas e ligeiramente estruturadas
• Suporte de borracha com ranhura e lábio de vedação curto, médio e longo disponível
• Placa de base de alumínio ou aço
• Modelo de furação disponível mediante solicitação do cliente

Selection of Vacuum Cups for glass Industry

Flat suction cups are widely used for smooth glass surfaces where fast vacuum response and stable positioning are required. Explore our complete range of flat suction cups for glass handling for additional sizes, materials and designs.

Flat Suction Cups RL

Diâmetro: 120mm a 400mm
Material: NBR, Silicone, Viton

＿

Flat Suction Cups PK

Diâmetro: 200mm, 280mm
Material: NBR Preto

＿

Flat Suction Cups HE

Diâmetro: 100mm, 150mm, 200mm
Material: NBR, Silicone, Viton

＿

Flat Suction Cups NO

Diâmetro: 160mm, 230mm, 250mm
Material: NBR

＿

Flat Suction Cups 200 PK Vulcanized

Dimensão: 200mm
Material: NBR

＿

Flat Suction Cups 280 PK Vulcanized

Dimensão: 280mm
Material: NBR

＿

Flat Suction Cups BLSP 250 COP

Dimensão: 250mm
Material: NBR

＿

Ventosas Planas PU

Dimensão: 68mm x 168mm
Material: PU

＿

Tampa de Cobertura de Sucção MTC

Diâmetro: 20mm a 550mm

＿

Flat Suction Cups BY

Dimensão: 80mm x 150mm, 90mm x 250mm
Material: NBR

＿

Ventosas Planas TL

Diâmetro: 60mm a 290mm
Material: NBR, Silicone, Viton

＿

Ventosas Planas CO

Diâmetro: 120mm, 150mm, 200mm
Material: NBR, Silicone, Viton

＿

Ventosas Planas BSP VS-NO

Diâmetro: 130mm, 200mm
Material: NBR

＿

Ventosas Planas 160 R

Dimensão: 160mm
Material: NBR, Silicone, Viton

＿

Ventosas Planas 80 TL

Dimensão: 80mm
Material: NBR, Silicone, Viton

＿

Ventosa de Fole 290 BY

Dimensão: 290mm
Material: NBR

＿

Ventosa de Fole 285G/61

Diâmetro: 285mm
Material: NBR

＿

Ventosas Planas 69×169

Dimensões: 69 mm x 169 mm
Material: NBR, Silicone, Viton

＿

Ventosa de Fole 110 CO

Dimensões: 110 mm
Material: NBR, Silicone, Viton

＿

BLSP 230 L PU

Dimensões: 230 mm
Material: PU

＿

Ventosas Planas 60 x 190

Dimensões: 60 mm x 190 mm
Material: NR

＿

BSC 95 R PU

Dimensão: 95mm
Material: PU

＿

Ventosas Planas 150×370 NBR

Diâmetro: 150 mm x 370 mm
Material: NBR

＿

Ventosas Planas 95 L (PFG)

Dimensão: 95mm
Material: NBR, Silicone, Viton

＿

Equipamento de elevação a vácuo com ventosas para vidro

Suction cups are one part of a glass vacuum lifter. The rated capacity and permitted operating conditions apply to the complete configured system, including its lifting frame, cup positions, vacuum supply, monitoring devices and connections. A replacement cup should therefore be checked against the equipment manufacturer’s requirements before use.

Inspect the glass and contact surfaces, maintain the vacuum system and follow the specified lifting procedure. Vacuum handling does not remove the need for clean contact areas or protect glass from every source of damage.

For replacement or new applications, send EUROTECH the machine make and model, existing cup reference, dimensions, mounting details and photos. Include the glass type, surface condition, load and handling orientation so that suitable options can be assessed.