October 14, 2026

Why Matching Dimensions Is Not Enough When Replacing Vacuum Suction Cups

Two vacuum suction cups with the same outside dimensions may have different holding and positioning performance. Matching diameter or length and width is only the beginning of replacement selection. Effective suction area, lip geometry, material, stiffness, working height and the conditions behind the supplier’s capacity rating also matter. In EUROTECH’s replacement discussions, dimensions are often the first information available. Our recommendation […]

真空吸着パッド 0 5 min read
October 14, 2026

Why Can Glass Slip Even When the Vacuum Gauge Looks Normal?

A normal vacuum reading does not prove that a suction cup has enough resistance to sliding. The gauge indicates pressure at its measurement point. Glass can still move if the effective suction area is too small, the contact surface has lost grip, or acceleration and machining forces exceed the available holding capacity. In EUROTECH’s glass-handling experience, cup sizing and the condition […]

未分類 0 5 min read
October 14, 2026

Suction Cup Marks Despite Suction Cup Covers?

APPLICATION INSIGHT · EUROTECH VACUUM TECHNOLOGIES Suction cup marks can still appear on glass after protective covers are installed. A cover helps reduce direct contact between the suction cup material and the workpiece, but dust, concentrated contact loads and small movements can still affect the surface. When marks remain, cup size and vacuum level deserve attention alongside cover condition. In […]

吸着パッドカバー 0 7分で読めます
October 2, 2026

A Replacement Glass Conveyor Roller

How to Measure a Replacement Glass Conveyor Roller When a conveyor roller becomes worn, cut, cracked, or damaged on a glass processing line, identifying the correct replacement is not always as simple as measuring its outside diameter. A replacement roller must match the existing conveyor mechanically while also providing suitable support and contact with the glass. For most replacement inquiries, […]

ガラス産業 0 6分で読めます
October 2, 2026

Reduce Glass Conveyor Rollers Maintenance Downtime

How Quick-Change Glass Conveyor Rollers Reduce Maintenance Downtime In automated glass processing, even a relatively small wear component can become a major maintenance issue when replacing it requires extensive machine disassembly. Conveyor rollers are a good example. Glass conveyor rollers operate continuously across loading, transfer, washing, processing and production areas. Over time, roller surfaces can become worn, cut or damaged. […]

ガラス産業 0 7分で読めます