Penutup Cawan Sedutan
Penutup Cawan Sedutan MTC
EUROTECH MTC suction cup covers fit over suitable vacuum suction cups and suction plates to provide a non-woven contact layer for glass and other surface-sensitive workpieces. They reduce direct contact between the cup material and the workpiece and may help reduce visible contact marks. Select a candidate cover by cup dimensions and profile, then review the complete configuration for the intended application.
MTC Cover Options at a Glance
- Contact layer: Non-woven cover fitted over a suitable suction cup or suction plate.
- Published round-cup size references: Options from 20 to 550 mm. Check the individual ranges in the size table; this is not a continuous fit range or a lifting-capacity rating.
- Retention: Integrated elastic band. Check fit and retention on the actual cup profile.
- Other dimensions or shapes: Send the cup dimensions and photographs for review.
View MTC models and cup-size references or use the MTC suction cup cover selector to identify a candidate size.
Need help with an existing installation? See what to include in your enquiry.
Penutup Cawan Sedutan MTC
MTC covers form a non-woven contact layer between a suitable suction cup and the workpiece, helping reduce direct elastomer contact and visible contact marks.
SSUZ Covers for Suction Cup Storage
SSUZ covers protect suction cups when they are not in use. For a workpiece-contact cover used during handling, review the MTC options on this page.
Tanda cawan sedutan pada kaca boleh terhasil daripada pencemaran, geseran, sifat bahan, tekanan sentuhan dan keadaan operasi lain. Baca Mengapa Cawan Sedutan Vakum Meninggalkan Tanda pada Kaca?
Lihat Panduan Saiz Penutup Cawan Sedutan MTC
Sarung cawan sedutan MTC terdapat dalam pelbagai saiz untuk cawan sedutan bulat dan bujur. Memilih penutup yang betul bergantung terutamanya pada dimensi dan bentuk cawan sedutan.
Gunakan panduan saiz kami untuk mengenal pasti penutup MTC yang sesuai untuk aplikasi anda. Jika saiz anda tidak disenaraikan, hantarkan diameter cawan sedutan, dimensi atau foto kepada kami untuk bantuan.
- The cover fits over a suitable suction cup or suction plate and is secured with an integrated elastic band. Confirm retention throughout the handling cycle.
- The round-cup selection references listed below range from 20 mm to 550 mm. These dimensions are fit references, not lifting-capacity ratings.
- Confirm material suitability for the workpiece, temperature and any cleaning agents used in your process.
| MTC model | Cup-size reference (mm) |
|---|---|
| MTC 39 | 20 |
| MTC 31 | 40 |
| MTC 8 | 55 – 60 |
| MTC 9 | 70 – 80 |
| MTC 63 | 85 – 95 |
| MTC 1 | 100 – 115 |
| MTC 2 | 120 – 130 |
| MTC 14 | 140 – 150 |
| MTC 3 | 160 – 190 |
| MTC 4 | 200 – 220 |
| MTC 5 | 230 – 250 |
| MTC 30 | 250 – 280 |
| MTC 6 | 280 – 320 |
| MTC 7 | 330 – 350 |
| MTC 10 | 360 – 400 |
| MTC 61 | 500 – 520 |
| MTC 57 | 500 – 550 |
Penutup Cawan Sedutan untuk Pengendalian Kaca
Penutup cawan sedutan MTC menyediakan lapisan pelindung tambahan antara cawan sedutan dan bahan kerja. Ia amat sesuai untuk aplikasi pengendalian kaca di mana perlindungan permukaan dan pengurangan tanda sedutan adalah penting.
Cawan sedutan vakum digunakan secara meluas sepanjang pengeluaran dan pemprosesan kaca, daripada pemuatan dan pengangkutan hingga pemotongan dan pemprosesan selanjutnya. Penutup MTC boleh dipasang pada cawan sedutan yang sesuai untuk membantu melindungi permukaan kaca sensitif semasa pengendalian.
Ketahui lebih lanjut tentang Cawan Sedutan Vakum untuk Pengendalian Kaca →
MTC Covers in Installed Applications
Explore suction cup cover installation photos and configuration notes for examples of installed arrangements and the details to review for your application.
MTC Covers Referenced in Glass Manufacturers’ Processing Guidelines
Şişecam's processing guideline names Eurotech MTC 2 where contact with the coated side cannot be avoided for the specified glass products. arcon's June 2026 heat-treatable-coatings guide lists MTC in its production aids, subject to compatibility checks. These references do not establish suitability for every cover size, coating or installation.
Review the source scopes and handling requirements before assessing a candidate configuration.
Kaca Bersalut, Berlamina & Penebat
Kaca bersalut, berlamina dan berpenebat sering memerlukan penjagaan tambahan semasa pengendalian vakum. Cap jari, kotoran dan tanda sentuhan cawan sedutan boleh menjadi masalah terutamanya dalam pengeluaran kaca berlamina dan kaca penebat, kerana sesetengah permukaan menjadi tertutup atau tidak boleh diakses selepas pemasangan dan tidak lagi mudah dibersihkan.
MTC covers can help reduce direct elastomer contact with suitable glass surfaces. Validate surface quality after the relevant handling and downstream processes, particularly where the contacted surface will become inaccessible after assembly.
Mencegah Tanda Cawan Sedutan pada Kaca
A suitable suction cup cover may help reduce visible contact marks on glass. Confirm surface results and holding performance with the cover installed under the actual handling conditions.
Ketahui Cara Mencegah Kesan Cawan Sedutan pada Kaca →
Still seeing marks with suction cup covers? Check cup size and vacuum level →
Considering a different contact approach? Compare suction cup covers and non-marking suction cups
Pannkoke 388 with an MTC Cover: Published Load-Test Video
Pannkoke Vacuum Lifter published this video in July 2019 to examine the load-carrying behaviour of a Pannkoke 388 suction cup fitted with an MTC suction plate cover.
The video concerns a specific cup-and-cover combination. It does not establish a load rating for other configurations or demonstrate mark-free performance. Fit, holding capacity and surface results should be checked for your application.
MTC Development History and Patent References
Explore the documented development history and patent references associated with euroTECH suction cup covers, including the scope and limitations of these historical records.
Review an MTC Cover for Your Existing Suction Cup
Already have a vacuum handling system? Send the details below so EUROTECH can review a candidate MTC cover for the installed cup.
- Cup: Manufacturer, model, dimensions and shape; include photographs of the contact face and side profile.
- Workpiece: Glass product or other material, coating if present, and the surface being contacted.
- Operation: Workpiece weight, handling orientation, movement and vacuum conditions, where known.
- Requirement: The contact pattern or surface issue observed, the current cover if any, and the candidate MTC model if already selected.
Unknown details are fine for an initial enquiry. A dimensional match identifies a candidate for review; it does not establish compatibility, a working load or approval for the application.
Lebih lanjut mengenai cawan sedutan vakum: