Cubiertas para ventosas
Cubiertas para ventosas MTC
During laminated glass and insulating glass production, suction cup covers can provide a protective layer between a suitable vacuum suction cup and the glass surface. By reducing direct contact between the cup material and the workpiece, they may help reduce visible contact marks and additional cleaning. Suitability depends on the cup, glass surface and handling conditions, so the complete application should be reviewed.
- Suction cup covers provide a protective contact layer for suitable flat, smooth and surface-sensitive workpieces. Check the cover and cup combination on the actual coated, processed or painted surface.
- Ideal para su uso en la fabricación, el procesamiento y el transporte, especialmente en las industrias del vidrio plano.
- Available for review with a wide range of suction cups and suction plates. Confirm fit and retention for the specific cup profile and application.
Cubiertas para ventosas MTC
MTC covers form a non-woven contact layer between a suitable suction cup and the workpiece, helping reduce direct elastomer contact and visible contact marks.
SSUZ Covers for Suction Cup Storage
SSUZ covers protect suction cups when they are not in use. For a workpiece-contact cover used during handling, review the MTC options on this page.
Las marcas que dejan las ventosas en el cristal pueden deberse a la contaminación, la fricción, las propiedades del material, la presión de contacto y otras condiciones de funcionamiento. Lee «¿Por qué las ventosas dejan marcas en el cristal?».
More Than 20 Years of Suction Cup Cover Development
The technology behind euroTECH’s protective suction cup covers can be traced back more than two decades. A German priority filing was made in 2002, followed by European patent application EP03018816 in 2003. The application was published as EP1391404A1 under the title “Gripping device with a covering.” Peter Bunnenberg is named as the inventor, and the patent documentation specifically addresses the handling of delicate surfaces, including glass plates.
The concept later became associated with MTC suction cup covers for surface-sensitive vacuum handling applications. Today, MTC covers continue to provide a protective interface between vacuum suction cups and sensitive workpiece surfaces.
Explore the history of suction cup covers for glass handling →
Choosing between a suction cup cover and a non-marking suction cup depends on the existing equipment, workpiece surface and handling conditions. Read our guide to suction cup covers vs. non-marking suction cups.
Fundas para ventosas destinadas a la manipulación de vidrio
Las fundas para ventosas de MTC proporcionan una capa protectora adicional entre la ventosa y la pieza de trabajo. Son especialmente adecuadas para aplicaciones de manipulación de vidrio en las que es importante proteger la superficie y reducir las marcas de succión.
Las ventosas de vacío se utilizan ampliamente en toda la cadena de producción y procesamiento del vidrio, desde la carga y el transporte hasta el corte y el procesamiento posterior. Las fundas de MTC pueden colocarse sobre las ventosas adecuadas para ayudar a proteger las superficies delicadas del vidrio durante su manipulación.
Más información sobre las ventosas de vacío para la manipulación de vidrio →
MTC Covers in Installed Applications
Explore suction cup cover installation photos and configuration notes for examples of installed arrangements and the details to review for your application.
Vidrio recubierto, laminado y aislante
El vidrio recubierto, laminado y aislante suele requerir un cuidado especial durante su manipulación al vacío. Las huellas dactilares, la suciedad y las marcas dejadas por las ventosas pueden resultar especialmente problemáticas en la producción de vidrio laminado y aislante, ya que algunas superficies quedan encerradas o son inaccesibles tras el montaje y ya no se pueden limpiar fácilmente.
MTC covers can help reduce direct elastomer contact with suitable glass surfaces. Validate surface quality after the relevant handling and downstream processes, particularly where the contacted surface will become inaccessible after assembly.
Cómo evitar las marcas de las ventosas en el cristal
A suitable suction cup cover may help reduce visible contact marks on glass. Confirm surface results and holding performance with the cover installed under the actual handling conditions.
Descubre cómo evitar las marcas de las ventosas en el cristal →
Still seeing marks with suction cup covers? Check cup size and vacuum level →
Guía de tallas de las fundas para ventosas MTC
Las fundas para ventosas de MTC están disponibles en una amplia gama de tamaños para ventosas redondas y ovaladas. La elección de la funda adecuada depende principalmente de las dimensiones y la forma de la ventosa.
Utiliza nuestra guía de tallas para encontrar una cubierta MTC adecuada para tu aplicación. Si tu talla no aparece en la lista, envíanos el diámetro de la ventosa, sus dimensiones o una foto para que podamos ayudarte.
- The cover fits over a suitable suction cup or suction plate and is secured with an integrated elastic band. Confirm retention throughout the handling cycle.
- The round-cup selection references listed below range from 20 mm to 550 mm. These dimensions are fit references, not lifting-capacity ratings.
- Confirm material suitability for the workpiece, temperature and any cleaning agents used in your process.
Not sure which size fits your cup? Use the MTC suction cup cover selector to compare published dimensions and prepare your application details for review.
Consulta la guía de tallas de las fundas para ventosas de MTC
| Tipo | Tamaño (mm) |
|---|---|
| MTC 39 | 20 |
| MTC 31 | 40 |
| MTC 8 | 55 - 60 |
| MTC 9 | 70 - 80 |
| MTC 63 | 85 - 95 |
| MTC 1 | 100 - 115 |
| MTC 2 | 120 - 130 |
| MTC 14 | 140 - 150 |
| MTC 3 | 160 - 190 |
| MTC 4 | 200 - 220 |
| MTC 5 | 230 - 250 |
| MTC 30 | 250 - 280 |
| MTC 6 | 280 - 320 |
| MTC 7 | 330 - 350 |
| MTC 10 | 360 - 400 |
| MTC 61 | 500 - 520 |
| MTC 57 | 500 - 550 |
Selecting an MTC cover requires more than matching the nominal dimensions. Confirm the cup profile, cover retention, workpiece surface and handling conditions before use. Contact EUROTECH if the required dimensions are not listed.
Pannkoke 388 with an MTC Cover: Published Load-Test Video
Pannkoke Vacuum Lifter published this video in July 2019 to examine the load-carrying behaviour of a Pannkoke 388 suction cup fitted with an MTC suction plate cover.
The video concerns a specific cup-and-cover combination. It does not establish a load rating for other configurations or demonstrate mark-free performance. Fit, holding capacity and surface results should be checked for your application.
Considering an MTC cover for your existing suction cup? Send us your cup dimensions, workpiece details and handling requirements for an application review.
Más información sobre las ventosas de vacío: