
Vacuum Suction Filters: Selection & Maintenance | EUROTECH
Vacuum Suction Filters: Selection and Maintenance
EUROTECH TAIWAN은 진공 부품 분야의 모듈식 구조 시스템으로 잘 알려져 있습니다. 흡입판, 밸브, 피팅, 부착 부품 등 필요한 것이 무엇이든 저희가 갖추고 있습니다. 대부분의 기존 진공 리프터와 진공 취급 시스템에는 진공 필터가 장착되어 있습니다. 당사는 수년에 걸쳐 진공 시스템 내로 유입되어 시스템 오작동을 유발할 수 있는 이물질과 먼지 입자를 차단하기 위해 설치해야 하는 다양한 종류의 진공 필터를 개발해 왔습니다.
Select a vacuum filter by checking the required airflow at the system’s operating vacuum, the pressure drop across the filter, and the connection size. Matching the port size alone does not establish whether a filter is suitable for a vacuum pump, side-channel blower or ejector.
Assess the filter’s resistance together with the hoses, valves and fittings in the circuit. Confirm that the system can reach the required vacuum at the suction cups within the required evacuation time. Follow the specified flow direction and mounting position.
If the circuit uses compressed air to release the workpiece, confirm the pressure limits and operating conditions for the exact filter model. The BVF-D design described below addresses brief pressure pulses during quick release. This does not mean that every filter series can be pressurized or that its cartridge can be cleaned with compressed air.
가장 일반적인 필터는 BVF 타입입니다. 이 필터는 판금으로 제작되었으며 분체 도장 처리되어 있습니다. 세척이 용이하고 필요 시 쉽게 교체할 수 있는 교체형 필터 카트리지가 장착되어 있습니다. 연결 나사산은 G 3/8” 내부 나사산부터 G 4” 내부 나사산까지 다양합니다. BVF 제품군은 유량 범위가 12 m³/h에서 1260 m³/h에 이르는 11종의 진공 필터를 포함합니다. 자세한 내용은 당사 카탈로그에서 확인하실 수 있습니다.
BVF 및 BVF-D 시리즈 진공 필터

BVF 시리즈

사용 중인 진공 필터
BVF-D 시리즈는 G 3/8”부터 G 11/4”까지의 연결 규격을 갖춘 6종의 진공 필터로 구성되어 있습니다. 이 제품들은 공작물을 고속으로 분리해야 할 때와 같이 압축 공기를 사용하여 신속하게 분리할 수 있도록 하는 추가 장치가 장착되어 있습니다. 압축 공기는 시스템 내의 고진공 상태를 해제하는 데 사용됩니다. 이 경우 진공 필터의 커버가 취약한 부분입니다. 나사산이 있는 핀과 평면 널링 너트(DIN 467)로 구성된 내부 구조 덕분에, 압축 공기를 사용하여 신속하게 배기할 때 필터 하우징 내부에 발생하는 순간적인 압력(임펄스 압력)으로부터 커버가 견고하게 보호됩니다.
이 필터는 판금으로 제작되었으며 분체 도장 처리되어 있습니다. 세척이 용이하고 필요 시 쉽게 교체할 수 있는 교체형 필터 카트리지가 장착되어 있습니다. 연결 나사산은 G 3/8” 내부 나사산부터 G 11/4” 내부 나사산까지 다양합니다. BVF-D 제품군은 유량 범위가 12 m³/h에서 108 m³/h에 이르는 6종의 진공 필터를 포함합니다. 자세한 내용은 당사 카탈로그에서 확인하실 수 있습니다.

BVF-D 시리즈

사용 중인 진공 필터
당사의 BVF-K 시리즈는 폴리에틸렌으로 제작된 교체형 필터 카트리지가 장착된 경량 필터입니다. 하우징은 PVC로 제작되었으며, 투명(투과성) 필터 하우징을 갖추고 있습니다. 내부에는 세척이 용이하고 필요 시 쉽게 교체할 수 있는 교체형 필터 카트리지가 장착되어 있습니다. 연결 나사산은 G 1/8” 내부 나사산부터 G 3/4” 내부 나사산까지 지원됩니다. BVF-K 제품군은 유량 범위가 2.7 m³/h에서 35.7 m³/h에 이르는 5종의 진공 필터를 포함합니다. 진공 필터를 열어 세척할 때 별도의 공구가 필요하지 않습니다. 자세한 내용은 당사 카탈로그에서 확인하실 수 있습니다.

진공 컵 필터 BVF-K 시리즈
BFF형 미세 필터는 연결 니플의 나사산이나 서스펜션 볼트 또는 흡착 컵의 나사 구멍에 직접 장착됩니다. 총 3가지 유형이 제공됩니다. G 1/8”, G ¼” 및 G 3/8” 제품은 PVC로 제작되었으며, 필터 요소로는 스테인리스 스틸 메쉬가 사용됩니다. 자세한 내용은 당사 카탈로그에서 확인하실 수 있습니다.


진공 컵 필터 BFF 시리즈
Vacuum filter inspection and maintenance
Set inspection intervals according to the dust load, operating hours and observed filter condition, while following the maintenance requirements for the specific model. A filter used in a dusty process may need attention sooner than one used in a cleaner environment.
- Follow the equipment instructions for isolating the system and releasing vacuum or pressure before opening the filter.
- Inspect the cartridge for contamination or damage, and check the housing seals for damage and correct seating.
- Clean the cartridge only with a method permitted for that model. Replace it when required by its condition or the manufacturer's instructions.
- After reassembly, check the connections, specified flow direction and mounting position.
Record the inspection date, cartridge condition and any cleaning or replacement work. Compare evacuation time and the vacuum reached at the suction cups with a known-good baseline under the same operating conditions. Use these records to adjust the inspection interval and investigate any loss of performance.
EUROTECH vacuum technologies는 포괄적인 진공 부품 라인업은 물론, 취급 및 이송 솔루션을 제공합니다를 제공합니다. 또한 당사의 제품군에는 고객 맞춤형 진공 흡착컵 제품군과 고객의 요구 사항에 맞춰 설계된 솔루션이 모두 포함되어 있습니다.
문의 사항이 있으시면 언제든지 주저하지 말고 연락해 주십시오.
info@eurotech-vacuum-technologies.com
양식을 작성해 주셔도 되며, 곧 연락드리겠습니다.