Industri Kaca
Handle glass pane with vacuum cups

Handle glass pane with vacuum cups

How to Handle Glass Pane with Vacuum Cups

To handle a glass pane with vacuum cups, match the complete lifting system to the panel’s weight, dimensions, surface and required orientation. The cups must contact the glass and form a suitable seal; a vacuum source then creates the pressure difference used to hold the panel. Cup selection alone does not establish the safe working load of the assembled lifting device.

Check the Glass and the Handling Task

Identify the glass type, thickness, dimensions and mass, together with any coatings, surface texture, curvature or contamination. Specify whether the operation involves horizontal transfer, vertical lifting or rotation. These conditions affect sealing, friction and load distribution. A cup that works on clean, flat glass may require a different assessment on curved, coated or wet surfaces.

Match the Cups to the Complete Vacuum System

Cup Size, Material and Contact Surface

Select cup geometry and material for the actual glass surface and operating conditions. Consider the available contact area, temperature, cleaning agents and sensitivity to marks. Check the manufacturer’s product data and assess surface compatibility before routine use. A larger nominal diameter does not, by itself, confirm adequate lifting capacity.

Vacuum Supply and Load Distribution

The vacuum source, valves, hoses, monitoring devices and cup arrangement must work together. Selection should account for the required vacuum level, leakage, movement and the capacity specified for the handling direction. Confirm the complete system’s rated load and required safeguards with the equipment manufacturer or a qualified system designer.

Review Suitable Glass Handling Cups

The 200 PK and 280 PK product references below are starting points for evaluation. Compare their current specifications, mounting arrangements and sealing materials with your application. Their suitability depends on the complete lifting configuration and operating conditions.

penggunaan-kaca-laminasi
cangkir hisap dengan bellow industri

Prepare, Transfer and Release the Panel

Use the lifting equipment according to its operating instructions, with trained personnel and the required pre-use checks. Inspect the glass contact areas, cup seals and vacuum circuit for contamination, damage or wear. Use cleaning methods compatible with both the glass coating and the cup material.

Verify the specified operating conditions before transfer and monitor the vacuum as required by the equipment instructions. Follow the approved lifting and movement procedure, including the manufacturer’s response to a low-vacuum warning. Support the panel in its intended position before operating the release function.

Get Help Selecting Glass Handling Suction Cups

For an application review, provide the panel dimensions and weight, glass type, surface condition, handling direction, cycle requirements and existing equipment details. Explore our vacuum suction cups for glass handling, or contact EUROTECH to discuss suitable options.